Reference Designs | Direct Datasheet

Home > Reference Designs

Reference Designs

Power Solution for an Engineering Equipment Fuel Injector

Reference Design:PMP7967

Reference Designs

Non-Standard (>25.5W) PoE - High Efficiency Forward Converter (12V@5A) Reference Design

Reference Design:PMP7499

Reference Designs

Power-optimized 16-bit 1MSPS Data Acquisition Block for Lowest Distortion and Noise Reference Design

Reference Design:TIPD149

Reference Designs

NFC Configuration & Logging Interface (Dual Port FRAM: NFC <-> FRAM <-> Serial) Reference Design

Reference Design:TIDA-00230

Reference Designs

24V input to 14V@6A, Non Sync Buck LED Driver

Reference Design:PMP7761

Reference Designs

High Current Integrated FET Synchronous Buck Converter Using the TPS51315

Reference Design:PMP3872

Reference Designs

Dual Output Fly-Buck Reference Design

Reference Design:PMP10101.1

Reference Designs

16-bit 400KSPS 4-Ch. Multiplexed Data Acquisition Ref Design for High Voltage Inputs, Low Distortion

Reference Design:TIPD151

Reference Designs

Wide Input Range (140Vac to 440Vac) Non Isolated Off-line Flyback Converter with Multiple Outputs

Reference Design:PMP10055.1

Reference Designs

Sync Buck, Buck (1.1V @ 8A) for Set-Top-Box

Reference Design:PMP2236.1

Reference Designs

Xilinx Kintex UltraScale FPGA Power Solution Reference Design

Reference Design:PMP9444

Reference Designs

CC2511 USB-Dongle Reference Design

Reference Design:CC2511USB_REFDES

Reference Designs

Non sync buck controller with 32 to 36V input and 29.2V @ 6A output

Reference Design:PMP7757

Reference Designs

Connected Ethernet, USB, and LCD Reference Design

Reference Design:TIDM-CONNECTED-ETHERNET

Reference Designs

24Vin, +/- 15Vout, 3W Isolated SIP DC/DC Module Reference Design

Reference Design:PMP4415

Reference Designs

CISPR 25 Class 5 Rated 6.6W Automotive Power Reference Design

Reference Design:PMP9398

Reference Designs

Overvoltage and Overcurrent Protection IC & Li+ Charger Front-End Protection IC Reference Design

Reference Design:TIDA-00034

Reference Designs

18Vdc-54Vdc Input, 24V @ 5A Output, Active Clamp Forward

Reference Design:PMP4844

Reference Designs

Class 4 PoE High Efficiency Active Clamp Forward Converter (3.3V) Reference Design

Reference Design:PMP10288

Reference Designs

Water Meter Reference Design for two LC Sensors, Using Extended Scan Interface (ESI)

Reference Design:TIDM-LC-WATERMTR

Reference Designs

3-42Vin, 5V at 3A Buck-Boost Optimized for Automotive Cold Crank Reference Design

Reference Design:PMP10681

Reference Designs

Streaming Audio Reference Design

Reference Design:TIDEP0009

Reference Designs

A Robust Glass-Breakage Detector Reference Design

Reference Design:TIDM-GBD-ROBUST

Reference Designs

Synchronous Flyback with High Line (195 to 265Vac) Input to 13V@1.6A Output with Low Standby Current

Reference Design:PMP5734

Reference Designs

Sync Bucks, Linear for Single-board Computer (SBC) Power (1.8V @ 4A)

Reference Design:PMP3247.3

Reference Designs

Direct Datasheet

Search over 400 Million Electronic Parts

Home > Reference Designs

Power Solution for an Engineering Equipment Fuel Injector

Non-Standard (>25.5W) PoE - High Efficiency Forward Converter (12V@5A) Reference Design

Power-optimized 16-bit 1MSPS Data Acquisition Block for Lowest Distortion and Noise Reference Design

NFC Configuration & Logging Interface (Dual Port FRAM: NFC <-> FRAM <-> Serial) Reference Design

24V input to 14V@6A, Non Sync Buck LED Driver

High Current Integrated FET Synchronous Buck Converter Using the TPS51315

Dual Output Fly-Buck Reference Design

16-bit 400KSPS 4-Ch. Multiplexed Data Acquisition Ref Design for High Voltage Inputs, Low Distortion

Wide Input Range (140Vac to 440Vac) Non Isolated Off-line Flyback Converter with Multiple Outputs

Sync Buck, Buck (1.1V @ 8A) for Set-Top-Box

Xilinx Kintex UltraScale FPGA Power Solution Reference Design

CC2511 USB-Dongle Reference Design

Non sync buck controller with 32 to 36V input and 29.2V @ 6A output

Connected Ethernet, USB, and LCD Reference Design

24Vin, +/- 15Vout, 3W Isolated SIP DC/DC Module Reference Design

CISPR 25 Class 5 Rated 6.6W Automotive Power Reference Design

Overvoltage and Overcurrent Protection IC & Li+ Charger Front-End Protection IC Reference Design

18Vdc-54Vdc Input, 24V @ 5A Output, Active Clamp Forward

Class 4 PoE High Efficiency Active Clamp Forward Converter (3.3V) Reference Design

Water Meter Reference Design for two LC Sensors, Using Extended Scan Interface (ESI)

3-42Vin, 5V at 3A Buck-Boost Optimized for Automotive Cold Crank Reference Design

Streaming Audio Reference Design

A Robust Glass-Breakage Detector Reference Design

Synchronous Flyback with High Line (195 to 265Vac) Input to 13V@1.6A Output with Low Standby Current

Sync Bucks, Linear for Single-board Computer (SBC) Power (1.8V @ 4A)

Working With Us: